Aeropak Contact Cleaner is a high quality cleaning solvent with effective cleaning power that’s plastic safe and is proven stable, and inert. Aeropak Contact Cleaner is a non-corrosive, non- staining, formula that contains no lubricants and will rapid and completely evaporate after use. The fast evaporation minimizes downtime common with ‘cleaning-in-place’ solutions, leaving a residue free surface that prevents harmful buildup and reduces rinsing or wiping
CAUTIONS
• Read the instructions before use
• Deactivate equipment before use. Flammable.
• Ventilate well after use and before reactivating.
• Protect eyes, skin and donot inhale. (See SDS)
• Test on small area before use.
DIRECTIONS
• Apply liberally and allow to run off.
• Use extension tube for as needed.
• Equipment MUST NOT be energized.
• Allow spray to fully evaporation before reactivation and use.
PRECAUTIONS
Do not puncture, incinerate or store above 50°C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock.
CORRECT DISPOSAL
Spray unneeded product on to newspaper dispose to waste. Empty can is recyclable.
SAFETY WARNINGS
Keep out of reach of children
If swallowed seek medical advice immediately.
FIRST AID
If in eyes, hold eyelids apart, flush continuously with running water. Continue flushing for at least 15 minutes OR until advised to stop by a doctor. If in haled, remove from contaminated area. To protect rescuer, use a Type A (Organic vapour) respirator or an Air-line respirator (in poorly ventilated areas). Apply artificial respiration if not breathing. Skin Contact, If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. Continue flushing with water until advised to stop by a doctor. If swallowed, do not induce vomiting. Ingestion is considered unlikely due to product form.
PROPELLANT: HYDROCARBON
INGREDIENTS
Hexane 65-75%
Propane 10-15%
Butane 20-25%