Aeropak Clear Insulating Varnish spray is designed to protect electronics and circuitry against moisture，dust and corrosion. It is ideal for automotive electronics，circuit boards， aviation instrumentation， soft PCB's，Industrial PLC main-boards， and industrial control electronics. The product has good stablity to acid，alkali， salt and other chemicals and has excellent insulation leakage performance and humidity.

Aeropak Clear Insulating Varnish spray is a clear liquid mix of epoxy resin and elastic polymers and has strong adhesion， small stress and provides a addtional layer of insulation to home appliances and controllers. Its dry flm produces no free-radicals and wil not corrode components， it is heat resistant up to 130℃， after which it wils often but wil not falloff with no long harm to the insulation film.

APPLICATION

1.Clean the surface of any dr， water， oil grease，etc， and dry before spraying.

2.Cover and protect PCB I/O and test points，(Sockets， switches) from overspray.

3.Shake can well before use， keep the can 15-30cm from surface to spray.

4.Pay attention to the thickness of layer， don't spray too thick in one place.

5.To repair covered components， remove the coating with a heat gun for general areas or old soldering iron for smaller areas.After repair， clean the area with a brush， and dry， before re spraying coating to replace protec ion layer.

PRECAUTIONS

1.Use in well ventilated place.

2.Keep away from any sources of flame or heat.

3.Clean PCB/components of dirt， grease， water， oil.

4.Dry and de humidify PCB to prevent trapping

5.Use in a well-vent lated dry area.Ensure the can is at room temperature before use.

Do not apply in temperatures below 10  degrees or when humid,moisture under the conforming coating.